1. In the initial stage of construction which type of pavement is cheap?
a) Flexible
b) Rigid
c) Composite
d) WBM
Explanation: Flexible pavements are easy to construct and have cheaper cost than C. C pavements and also they are easily accessible to the users.
2. A good soil should have __________
a) Ease of compaction
b) Temporary strength
c) High sensitivity
d) High void ratio
Explanation: A good soil should have ease of compaction, permanent strength and less sensitivity.
3. The process by which the water voids are removed is called __________
a) Compaction
b) Consolidation
c) Permeability
d) Shear strength
Explanation: The water voids are mostly removed by consolidation; it is a long process so mostly compaction is used.
4. If the GWT rises to the ground level, then the bearing capacity reduces by __________
a) 1/2
b) 1/3
c) 1/4
d) 3/4
Explanation: The bearing capacity of the soil reduces by 50% if the ground water rises to the ground level.
5. What is the most common method used for the removal of voids in soil?
a) Compaction
b) Consolidation
c) Permeability
d) Shear strength
Explanation: Compaction is the most commonly used method for removal of voids; it is mostly done by modified proctor or standard proctor test.
6. What is the volume of voids in the 3 phase diagram of soil?
a) Volume of air
b) Volume of water
c) Volume of air and volume of water
d) Volume of solids
Explanation: Both the volume of air and volume of water contribute to the voids in the 3 phase diagram of soil.
7. What is the ratio of volume of voids and volume of soil solids?
a) Void ratio
b) Porosity
c) Saturation
d) Air content
Explanation: The ratio of volume of voids and volume of soil solids is called as void ratio, porosity is the ratio of voids and total volume, saturation is volume of voids in volume of water, air content is air voids in volume.
8. Montimorrite is a type of mineral which causes expansive behaviour is found in __________
a) Black cotton soil
b) Laterite soil
c) River soil
d) Glacial soil
Explanation: Montimorolite is a type of mineral which is of expansive nature, it is found in mostly black cotton soil.
9. The soil that is formed by the action of wind is called __________
a) Lacustrine soil
b) Alluvial soil
c) Aeolian soil
d) Glacial soil
Explanation: The soil that is formed by the action of wind is called as Aeolian soil, lacustrine by lakes, alluvial by River and glacial by glacier.
10. The maximum density which is desirable in highway embankments is __________
a) Dry density
b) Saturated density
c) M.D.D
d) O.M.C
Explanation: The maximum density which is desirable in highway embankments is M.D.D, if it is greater than MDD then it’s density decreases.